Right Power Line Interactive UPS PowerCube 800VA
Capacity (VA): 800VA
Input
Input Voltage: 220V / 230V / 240V
Voltage Range: 140-290VAC
Input Frequency: 45 - 65Hz (Auto-sensing)
Output
Output Voltage: 220V / 230V / 240V
Voltage Regulation (Battery Mode): +/-10%
Output Frequency: 50 Hz or 60 Hz
Waveform: Simulated Sinewave
Transfer Time (Typical): 2ms - 6ms
Output Socket: 4 x British Sockets c/w Safety Window
Battery
Sealed Lead Acid Maintenance Free - CSB / LEOCH / YUASA Japan Battery: 12V 7Ah x 1pc
Hot-Swappable Battery (User Replaceable Design): Yes (able to replace battery without turning off UPS)
Back Up Time (Depending on Load): 15 - 20 Minutes
Recharge Time: 3 Hours to 90% after Complete Discharge
Status Indicator
LED Indicator: AC Mode, Battery Mode, Fault
Audible Alarms: Backup Mode, Low Battery, Battery Replacement, Overload, UPS Fault
Communication
Interface: RS232 & USB Port
Physical
Operating Environment: 0-40°C, 0-90% Relative Humidity (Non-Condensing)
Noise Level: Less than 40dB
Dimension (D x W x H): mm 292 x 199 x 91
Weight (KG): 5.8
Warranty: 3 Years for Electronic Parts and 2 Years for Battery Against Manufacturing Defect
PowerCube Series
Line Interactive UPS
The PowerCube Series uses a line-interactive topology which comes with simulated sinewave output to provide cost-effective power protection for your equipment. The UPS comes with mounting slots that allow users to easily mount it on a wall in order to achieve wall-mount orientation and save space.
The UPS comes with a built-in boost and buck Automatic Voltage Regulator (AVR) to ensure all connected equipment receives stable power at the same voltage as the utility.
The PowerCube Series is the ideal solution for any home or small office application such as personal computers, workstations, networking devices, and Point-of-Sales (POS) systems.
FEATURES
LED Indicator
3 x L.E.D indicator to show signal of UPS in AC Mode, Battery Mode and UPS Fault
Wall-Mounted Design
This UPS comes with mounting slots which enable users to easily install on walls to achieve wall-mount
orientation and save space
Microprocessor Control Guarantees High Reliability
Provide clean and stable power to connected equipment while its embedded microprocessor
controller guarantees high reliability
Output Socket
Comes with 4 x 13Amp British Output Socket c/w Safety Window and 2 x IEC Ouput Socket
Boost & Buck AVR
Built-in boost and buck AVR ensures all connected equipment receive stable power with the same
voltage as utility
Green Power Function for Energy Saving
Green power function able to achieve lower power consumption for energy saving
Hot-Swappable Battery Design
UPS battery replacement can be performed without powering down the UPS
Power Management Software
Come with RS 232 Port & USB Port interfaces to support UPS Power Management Software
Front & Rear Panel
800VA
1. 4 x 13Amp British Output Socket c/w Safety Window
2. 2 x IEC Output Socket
3. 3 x L.E.D Indicators
4. Circuit Breaker
5. RJ 11/RJ45 Surge Protection
6. RS-232 Port
7. USB Port
8. Power ON/OFF Button